M1A SOCOM II QUICK DETACH SCOPE MOUNT GGG-1433

The SOCOM II M1A Rifle is a compact, powerful close quarter combat battle rifle. However its "Cluster Rail" system makes it difficult to mount a conventional low powered scope. You have to install an additional receiver mounted scope base to the SOCOM II along with a set of scope rings that are tall enough so that the objective lens clears the top rail. If you want Quick Detach capability, you need to mount your scope on top of the receiver mounted scope base with some type of QD mount and ring combo. We think that's a PIA and has too many interface points that could negatively affect the zero retention of your scope. The New Products Team at GG&G has come up with an innovative solution---The SOCOM II Accucam Quick Detach Scope Mount With 30mm Integral Rings:

• The Accucam Quick Detach System provides quick and easy on-off transitions while maintaining 1/2 MOA accuracy.
• Accucam QD System is fully adjustable to fit worn or out of spec dovetails.
• The SOCOM II Accucam Quick Detach Scope Mount has dual recoil lugs that interface with the recoil slots of the top dovetail rail to provide secure recoil resistance.
• The scope mount has 30mm integral rings with four cap screws per ring. Each cap screw threads into stainless steel helicoils.
• The cantilever feature of the SOCOM II Scope Base overhangs 3" to allow for additional forward/rearward adjustment for scopes with different eye reliefs.
• The underside of the SOCOM II QD Scope Mount is relief cut for unimpeded cartridge ejection.